Get-DnsServerResourceRecord

Get-DnsServerResourceRecord is accessible with the help of DnsServer module. To configure DnsServer, go through this link.

Synopsis

Gets resource records from a specified DNS zone.

Description

The Get-DnsServerResourceRecord cmdlet gets the following information for a specified resource record from a Domain Name System (DNS) zone:

— HostName
— RecordType
— RecordClass
— TimeToLive
— Timestamp
— RecordData

Parameters

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

-ComputerName

Specifies a DNS server. If you do not specify this parameter, the command runs on the local system. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.

Type:String
Aliases:Cn, ForwardLookupPrimaryServer
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

-Name

Specifies a node name within the selected zone. If not specified, it defaults to the root (@) node.

Type:String
Position:2
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

-Node

Indicates that the command returns only the resource records at the root of the node specified by the Name parameter. If Node is not specified then both the root and any child records in the node are returned.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

-RRType

Specifies the type of resource record.

The acceptable values for this parameter are:

  • HInfo
  • Afsdb
  • Atma
  • Isdn
  • Key
  • Mb
  • Md
  • Mf
  • Mg
  • MInfo
  • Mr
  • Mx
  • NsNxt
  • Rp
  • Rt
  • Wks
  • X25
  • A
  • AAAA
  • CName
  • Ptr
  • Srv
  • Txt
  • Wins
  • WinsR
  • Ns
  • Soa
  • NasP
  • NasPtr
  • DName
  • Gpos
  • Loc
  • DhcId
  • Naptr
  • RRSig
  • DnsKey
  • DS
  • NSec
  • NSec3
  • NSec3Param
Type:String
Accepted values:HInfo, Afsdb, Atma, Isdn, Key, Mb, Md, Mf, Mg, MInfo, Mr, Mx, NsNxt, Rp, Rt, Wks, X25, A, AAAA, CName, Ptr, Srv, Txt, Wins, WinsR, Ns, Soa, NasP, NasPtr, DName, Gpos, Loc, DhcId, Naptr, RRSig, DnsKey, DS, NSec, NSec3, NSec3Param, Tlsa
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

-Type

Specifies a type of record to get.

Type:UInt16
Position:3
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

-VirtualizationInstance

Specifies the virtualization instance in which the zone will be added. A virtualization instance is logical partition in a DNS Server, which is capable of independently hosting zones and zone scopes. Same name zones and zone scopes can be hosted in different virtualization instances. This parameter is optional and if not provided it will add the zone into the default virtualization instance which is functionally equivalent to a standard DNS server.

Type:String
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

-ZoneName

Specifies the name of a DNS server zone.

Type:String
Aliases:ForwardLookupZone
Position:1
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

-ZoneScope

Specifies the name of a zone scope.

Type:String
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

Syntax

Get-DnsServerResourceRecord [[-Name] <String>] [-ComputerName <String>] [-ZoneName] <String> [-Node] [-ZoneScope <String>] [-VirtualizationInstance <String>] [-Type] <UInt16> [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [<CommonParameters>]

Get-DnsServerResourceRecord [[-Name] <String>] [-ComputerName <String>] [-ZoneName] <String> [-Node] [-ZoneScope <String>] [-VirtualizationInstance <String>] [-RRType <String>] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [<CommonParameters>]

—————EXAMPLE 1—————
Get all resource records in a specified zone
PS C:> Get-DnsServerResourceRecord -ZoneName “TOSSolution.com”
This command gets all DNS server resource records in a zone named TOSSolution.com.

—————EXAMPLE 2—————
Get all resource records in a zone for a specified node
PS C:\> Get-DnsServerResourceRecord -ZoneName “TOSSolution.com” -Name “Admin01”
This command gets all DNS server resource records in a zone named TOSSolution.com from the node named Admin01.

—————EXAMPLE 3—————
Get all resource records in a zone by specified host name
PS C:\> Get-DnsServerResourceRecord -ZoneName “TOSSolution.com” -Name “Host02”
This command gets all DNS server resource records in a zone named TOSSolution.com that have the name Host02. The command is similar to the one in example 2, but in this case the command uses a host name instead of a node name.

—————EXAMPLE 4—————
Get all A records in a zone by specified host and specified type
PS C:\>Get-DnsServerResourceRecord -ZoneName “TOSSolution.com” -Name “Host03” -RRType “A”
This command gets all A records in a zone named TOSSolution.com that have the name Host03.

—————EXAMPLE 5—————
Get all A records in a specified zone
PS C:\>Get-DnsServerResourceRecord -ZoneName “TOSSolution.com” -RRType “A”
This command gets all A records in a zone named TOSSolution.com.

—————EXAMPLE 6—————
Get all NS records at the root of a specified zone
PS C:\>Get-DnsServerResourceRecord -ZoneName “TOSSolution.com” -RRType “NS” -Node
This command gets all NS records at the root of a zone named TOSSolution.com.

You can check the Version, CommandType and Source of this cmdlet by giving below command.

Get-Command Get-DnsServerResourceRecord

Get-Command Get-DnsServerResourceRecord

You can also read about

  • Set-DnsServerResourceRecord
  • Add-DnsServerResourceRecord
  • Remove-DnsServerResourceRecord

To know more PowerShell cmdlets(Commands) on DnsServer click here

Click on this Link for an Single place where you get all the PowerShell cmdlet sorted based on the modules.

You can also refer other blogs on PowerShell at link

You can also refer other blogs on Microsoft at link

And also if you required any technology you want to learn, let us know below we will publish them in our site http://tossolution.com/

Like our page in Facebook and follow us for New technical information.

References are taken from Microsoft

Leave a Reply

Your email address will not be published. Required fields are marked *