Add-DnsServerClientSubnet
Add-DnsServerClientSubnet is accessible with the help of DnsServer module. To configure DnsServer, go through this link.
Synopsis
Adds a client subnet to a DNS server.
Description
The Add-DnsServerClientSubnet cmdlet adds a client subnet to a Domain Name System (DNS) server. A client subnet is a group of IP subnets. A client subnet is identified by a name. A client subnet contains two lists of IP address, one for IPv4 subnets and one for IPv6 subnets. A client subnet can represent a logical group, for example, a geographical area, a datacenter, or a trusted resolver fleet. You can use client subnets in criteria in DNS policies. Multiple DNS policies can refer to the same client subnet.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
Specifies a remote DNS server. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
| Type: | String |
| Aliases: | Cn |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPv4Subnet
Specifies an array of IPv4 subnet addresses in Classless Interdomain Routing (CIDR) notation.
| Type: | String[] |
| Position: | 2 |
| Default value: | None |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPv6Subnet
Specifies an array of IPv6 subnet addresses in CIDR notation.
| Type: | String[] |
| Position: | 3 |
| Default value: | None |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Name
Species the name of the new client subnet.
| Type: | String |
| Position: | 1 |
| Default value: | None |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Syntax
Add-DnsServerClientSubnet [-Name] <String> [[-IPv4Subnet] <String[]>] [[-IPv6Subnet] <String[]>] [-PassThru] [-ComputerName <String>] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf] [-Confirm] [<CommonParameters>]
—————EXAMPLE 1—————
Add a client subnet specified in IPv4
PS C:>Add-DnsServerClientSubnet -Name “NASubnet” -IPv4Subnet 172.11.22.0/16 -PassThru
This command adds a client subnet named NASubnet to the DNS server. The command specifies the subnet by using an IPv4 address.
—————EXAMPLE 2—————
Add a client subnet specified in IPv6
PS C:\>Add-DnsServerClientSubnet -Name “DelhiSubnet” -IPv6Subnet 0db8::1/28 -PassThru | Format-List
This command adds a client subnet named DelhiSubnet to the DNS server. The command specifies the subnet by using an IPv6 address. The command uses the Format-List cmdlet to control the appearance of the output.
—————EXAMPLE 3—————
Add a client subnet specified in both IPv4 and IPv6
PS C:\>Add-DnsServerClientSubnet -Name “BangaloreSubnet” -IPv6Subnet 0db8::1/28 -PassThru -IPv4Subnet 172.16.0.1/8 | Format-List
This command adds a client subnet named BangaloreSubnet to the DNS server. The command specifies the subnet by using both IPv4 and IPv6 addresses.
You can check the Version, CommandType and Source of this cmdlet by giving below command.
Get-Command Add-DnsServerClientSubnet
You can also read about
- Get-DnsServerClientSubnet
- Remove-DnsServerClientSubnet
- Set-DnsServerClientSubnet
To know more PowerShell cmdlets(Commands) on DnsServer click here
