Site icon TOSS

Set-DnsServerDsSetting

powershell

Set-DnsServerDsSetting is accessible with the help of DnsServer module. To configure DnsServer, go through this link.

Synopsis

Modifies DNS Active Directory settings.

Description

The Set-DnsServerDsSetting cmdlet modifies Domain Name System (DNS) Active Directory settings.

Note: If any of the set operations fails, the Set-DnsServerDsSetting cmdlet must not terminate. It must continue to set other operations and display the modified settings.

Parameters

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

-ComputerName

Specifies a DNS server. The acceptable values for this parameter are: an IPv4 address; an IPv6 address; and any other value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.

Type:String
Aliases:Cn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Accept pipeline input:False
Accept wildcard characters:False

-DirectoryPartitionAutoEnlistInterval

Specifies the interval, during which a DNS server tries to enlist itself in a DNS domain partition and DNS forest partition, if it is not already enlisted. We recommend that you limit this value to the range one hour to 180 days, inclusive, but you can use any value. We recommend that you set the default value to one day. You must set the value 0 (zero) as a flag value for the default value. However, you can allow zero and treat it literally.

Type:TimeSpan
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

-LazyUpdateInterval

Specifies a value, in seconds, to determine how frequently the DNS server submits updates to the directory server without specifying the LDAP_SERVER_LAZY_COMMIT_OID control ([MS-ADTS] section 3.1.1.3.4.1.7) at the same time that it processes DNS dynamic update requests. We recommend that you limit this value to the range 0x00000000 to 0x0000003c. You must set the default value to 0x00000003. You must set the value zero to indicate that the DNS server does not specify the LDAP_SERVER_LAZY_COMMIT_OID control at the same time that it processes DNS dynamic update requests. For more information about LDAP_SERVER_LAZY_COMMIT_OID, see LDAP_SERVER_LAZY_COMMIT_OID control code.

The LDAP_SERVER_LAZY_COMMIT_OID control instructs the DNS server to return the results of a directory service modification command after it is completed in memory but before it is committed to disk. In this way, the server can return results quickly and save data to disk without sacrificing performance.

The DNS server must send this control only to the directory server that is attached to an LDAP update that the DNS server initiates in response to a DNS dynamic update request.

If the value is nonzero, LDAP updates that occur during the processing of DNS dynamic update requests must not specify the LDAP_SERVER_LAZY_COMMIT_OID control if a period of less than DsLazyUpdateInterval seconds has passed since the last LDAP update that specifies this control. If a period that is greater than DsLazyUpdateInterval seconds passes, during which time the DNS server does not perform an LDAP update that specifies this control, the DNS server must specify this control on the next update.

Type:UInt32
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

-MinimumBackgroundLoadThreads

Specifies the minimum number of background threads that the DNS server uses to load zone data from the directory service. You must limit this value to the range 0x00000000 to 0x00000005, inclusive. You must set the default value to 0x00000001, and you must treat the value zero as a flag value for the default value.

Type:UInt32
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

-PollingInterval

Specifies how frequently the DNS server polls Active Directory Domain Services (AD DS) for changes in Active Directory-integrated zones. You must limit the value to the range 30 seconds to 3,600 seconds, inclusive.

Type:UInt32
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

-RemoteReplicationDelay

Specifies the minimum interval, in seconds, that the DNS server waits between the time that it determines that a single object has changed on a remote directory server, to the time that it tries to replicate a single object change. You must limit the value to the range 0x00000005 to 0x00000E10, inclusive. You must set the default value to 0x0000001E, and you must treat the value zero as a flag value for the default value.

Type:UInt32
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

-TombstoneInterval

Specifies the amount of time that DNS keeps tombstoned records alive in Active Directory. We recommend that you limit this value to the range three days to eight weeks, inclusive, but you can set it to any value in the range 82 hours to 8 weeks. We recommend that you set the default value to 14 days and treat the value zero as a flag value for the default. However, you can allow the value zero and treat it literally.

At 2:00 A.M. local time every day, the DNS server must search all directory service zones for nodes that have the Active Directory dnsTombstoned attribute set to True, and for a directory service EntombedTime (section 2.2.2.2.3.23 of MS-DNSP) value that is greater than previous directory service DSTombstoneInterval seconds. You must permanently delete all such nodes from the directory server.

Type:TimeSpan
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Accept pipeline input:False
Accept wildcard characters:False

Syntax

Set-DnsServerDsSetting [-DirectoryPartitionAutoEnlistInterval <TimeSpan>] [-LazyUpdateInterval <UInt32>] [-MinimumBackgroundLoadThreads <UInt32>] [-RemoteReplicationDelay <UInt32>] [-ComputerName <String>] [-PollingInterval <UInt32>] [-TombstoneInterval <TimeSpan>] [-PassThru] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf] [-Confirm] [<CommonParameters>]

—————EXAMPLE 1—————
Set an auto-enlist interval for a directory partition
PS C:> Set-DnsServerDsSetting -DirectoryPartitionAutoEnlistInterval 15.00:00:00 -PassThru
This command sets an auto-enlist interval to 15 days for a directory partition.

You can check the Version, CommandType and Source of this cmdlet by giving below command.

Get-Command Set-DnsServerDsSetting

You can also read about

To know more PowerShell cmdlets(Commands) on DnsServer click here

Click on this Link for an Single place where you get all the PowerShell cmdlet sorted based on the modules.

You can also refer other blogs on PowerShell at link

You can also refer other blogs on Microsoft at link

And also if you required any technology you want to learn, let us know below we will publish them in our site http://tossolution.com/

Like our page in Facebook and follow us for New technical information.

References are taken from Microsoft

Exit mobile version