Remove-DhcpServerv6ExclusionRange is accessible with the help of DHCPServer module. To configure DHCPServer, go through this link.
Synopsis
Deletes a range of IPv6 addresses previously excluded from an IPv6 scope.
Description
Deletes a range of IPv6 addresses previously excluded from an IPv6 scope. If the StartRange and EndRange parameters are specified, then the exclusion range with the specified starting range and ending range values is deleted. If only the StartRange parameter is specified, then the exclusion range with specified starting range is deleted. If only the EndRange parameter is specified, then the exclusion range with specified ending range is deleted. If neither the StartRange nor EndRange parameter is specified, then all of the excluded IP address ranges present in the specified scope are removed.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the Dynamic Host Configuration Protocol (DHCP) server service.
| Type: | String |
| Aliases: | Cn |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EndRange
Specifies the ending IPv6 address of the excluded IP range deleted.
| Type: | IPAddress |
| Position: | 3 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-Passthru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Prefix
Specifies the IPv6 subnet prefix of the scope from which the excluded IP ranges is deleted.
| Type: | IPAddress |
| Position: | 1 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-StartRange
Specifies the starting IPv6 address of the excluded IPv6 range deleted.
| Type: | IPAddress |
| Position: | 2 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Syntax
Remove-DhcpServerv6ExclusionRange [-ComputerName <String>] [-Prefix] <IPAddress> [[-StartRange] <IPAddress>] [[-EndRange] <IPAddress>] [-Passthru] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf] [-Confirm] [<CommonParameters>]
————-EXAMPLE 1————-
PS C:>Remove-DhcpServerv6ExclusionRange -Prefix 2406:7400:73:c5e:: -StartRange 2406:7400:73:c5e::1 -EndRange 2406:7400:73:c5e::10
This example deletes the excluded IPv6 address range from 22406:7400:73:c5e::1 to 2406:7400:73:c5e::10 from DHCPv6 scope 2406:7400:73:c5e:: on the DHCP server service running on the local computer.
————-EXAMPLE 2————-
PS C:>Remove-DhcpServerv6ExclusionRange -ComputerName dhcpsrv.TOSSolution.com -Prefix 2406:7400:73:c5e:: -StartRange 2406:7400:73:c5e::1
This example deletes the IPv6 address range starting from 2406:7400:73:c5e::1 from DHCPv6 scope 2406:7400:73:c5e:: on the DHCP server service running on computer named dhcpsrv.TOSSolution.com.
————-EXAMPLE 3————-
PS C:>Remove-DhcpServerv6ExclusionRange -ComputerName dhcpsrv.TOSSolution.com -Prefix 2001:4898:7020:1020:: -EndRange 2001:4898:7020:1020::10
This example deletes the IPv6 address range with ending IP address of 2001:4898:7020:1020::10 from DHCPv6 scope 2001:4898:7020:1020:: on the DHCP server service running on computer named dhcpsrv.TOSSolution.com.
You can check the Version, CommandType and Source of this cmdlet by giving below command.
Get-Command Remove-DhcpServerv6ExclusionRange
You can also read about
- Add-DhcpServerv6ExclusionRange
- Get-DhcpServerv6ExclusionRange
To know more PowerShell cmdlets(Commands) on DHCPServer click here