Get-DhcpServerv4DnsSetting is accessible with the help of DHCPServer module. To configure DHCPServer, go through this link.
Get-DhcpServerv4DnsSetting is accessible with the help of DHCPServer module. To configure DHCPServer, go through this link.
Synopsis
Synopsis
Gets the DNS settings configured on the Dynamic Host Configuration Protocol (DHCP) server service for a specific scope, reservation, or server level.
Gets the DNS settings configured on the Dynamic Host Configuration Protocol (DHCP) server service for a specific scope, reservation, or server level.
Description
Description
The Get-DhcpServerv4DnsSetting cmdlet gets the DNS settings configured on the Dynamic Host Configuration Protocol (DHCP) server service for a specific scope, reservation, or server level.
The Get-DhcpServerv4DnsSetting cmdlet gets the DNS settings configured on the Dynamic Host Configuration Protocol (DHCP) server service for a specific scope, reservation, or server level.
If neither the ScopeId nor IPAddress parameter is specified, then DNS update settings from server level are returned.
If neither the ScopeId nor IPAddress parameter is specified, then DNS update settings from server level are returned.
This cmdlet gets the effective DNS setting at the specified level such as reservation, scope, or server. If the DNS setting value is not configured at the specified level, then the DNS settings from the level above will be fetched if configured. If the DNS setting is not specified at the server level, then the default behavior of the DHCP server service for DNS update is returned.
This cmdlet gets the effective DNS setting at the specified level such as reservation, scope, or server. If the DNS setting value is not configured at the specified level, then the DNS settings from the level above will be fetched if configured. If the DNS setting is not specified at the server level, then the default behavior of the DHCP server service for DNS update is returned.
Parameters
Parameters
-AsJob
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell background jobs, see about_Jobs.
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
-ComputerName
Specifies the DNS name, or IPv4 or IP6 address, of the target computer that runs the DHCP server service.
Specifies the DNS name, or IPv4 or IP6 address, of the target computer that runs the DHCP server service.
| Type: | String |
| Aliases: | Cn |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPAddress
-IPAddress
Specifies the IP address of the reservation for which the DNS update settings are retrieved.
Specifies the IP address of the reservation for which the DNS update settings are retrieved.
| Type: | IPAddress |
| Aliases: | ReservedIP |
| Position: | 2 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-PolicyName
-PolicyName
Specifies the name of a policy.
Specifies the name of a policy.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-ScopeId
-ScopeId
Specifies the scope identifier (ID), in IPv4 address format, for which the DNS update settings are retrieved.
Specifies the scope identifier (ID), in IPv4 address format, for which the DNS update settings are retrieved.
| Type: | IPAddress |
| Position: | 1 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-ThrottleLimit
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Syntax
Syntax
Get-DhcpServerv4DnsSetting [[-IPAddress] <IPAddress>] [[-ScopeId] <IPAddress>] [-ComputerName <String>] [-PolicyName <String>] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [<CommonParameters>]
Get-DhcpServerv4DnsSetting [[-IPAddress] <IPAddress>] [[-ScopeId] <IPAddress>] [-ComputerName <String>] [-PolicyName <String>] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [<CommonParameters>]
————–EXAMPLE 1————–
PS C:> Get-DhcpServerv4DnsSetting -ComputerName dhcpsrv.TOSSolution.com
This example gets the DHCPv4 server-level or server-wide DNS registration setting on the computer named dhcpsrv.TOSSolution.com.
————–EXAMPLE 1————–
PS C:> Get-DhcpServerv4DnsSetting -ComputerName dhcpsrv.TOSSolution.com
This example gets the DHCPv4 server-level or server-wide DNS registration setting on the computer named dhcpsrv.TOSSolution.com.
————–EXAMPLE 2————–
PS C:> Get-DhcpServerv4DnsSetting -ComputerName dhcpsrv.TOSSolution.com -ScopeId 192.168.1.0.
This example gets the DNS registration setting configured on the computer named dhcpsrv.TOSSolution.com for the scope 192.168.1.0.
————–EXAMPLE 2————–
PS C:> Get-DhcpServerv4DnsSetting -ComputerName dhcpsrv.TOSSolution.com -ScopeId 192.168.1.0.
This example gets the DNS registration setting configured on the computer named dhcpsrv.TOSSolution.com for the scope 192.168.1.0.
————–EXAMPLE 3————–
PS C:> Get-DhcpServerv4DnsSetting -ComputerName dhcpsrv.TOSSolution.com -IPAddress 192.168.1.10
This example gets the DNS registration setting configured on the computer named dhcpsrv.TOSSolution.com for the reserved IP address 192.168.1.10.
————–EXAMPLE 3————–
PS C:> Get-DhcpServerv4DnsSetting -ComputerName dhcpsrv.TOSSolution.com -IPAddress 192.168.1.10
This example gets the DNS registration setting configured on the computer named dhcpsrv.TOSSolution.com for the reserved IP address 192.168.1.10.
You can check the Version, CommandType and Source of this cmdlet by giving below command.
You can check the Version, CommandType and Source of this cmdlet by giving below command.
Get-Command Get-DhcpServerv4DnsSetting
Get-Command Get-DhcpServerv4DnsSetting
You can also read about
You can also read about
- Set-DhcpServerv4DnsSetting
To know more PowerShell cmdlets(Commands) on DHCPServer click here
To know more PowerShell cmdlets(Commands) on DHCPServer click here