Add-DhcpServerv6ExclusionRange is accessible with the help of DHCPServer module. To configure DHCPServer, go through this link.
Synopsis
Sets the range of IPv6 addresses to exclude from an IPv6 scope.
Description
The Add-DhcpServerv6ExclusionRange cmdlet sets the range of IPv6 addresses to exclude from an IPv6 scope. The IP addresses from this range will not be leased out by the Dynamic Host Configuration Protocol (DHCP) server service.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the DHCP server service.
| Type: | String |
| Aliases: | Cn |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EndRange
Specifies the ending IP address in exclusion range, as a string formatted as an IPv6 address.
| Type: | IPAddress |
| Position: | 3 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Prefix
Specifies the IPv6 prefix of the scope to which the exclusion range is added.
| Type: | IPAddress |
| Position: | 1 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-StartRange
Specifies the starting IP address in exclusion range, as a string formatted as an IPv6 address.
| Type: | IPAddress |
| Position: | 2 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Syntax
Add-DhcpServerv6ExclusionRange [-ComputerName <String>] [-StartRange] <IPAddress> [-EndRange] <IPAddress> [-Prefix] <IPAddress> [-PassThru] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf] [-Confirm] [<CommonParameters>]
——————EXAMPLE 1——————
PS C:>Add-DhcpServerv6ExclusionRange -Prefix 2406:7400:73:932f:: -StartRange 2406:7400:73:932f::1 -EndRange 2406:7400:73:932f::10
This example excludes the IPv6 addresses from 2406:7400:73:932f::1 to 2406:7400:73:932f::10 from DHCPv6 scope 2406:7400:73:932f:: on the DHCP server service running on the local computer.
——————EXAMPLE 2——————
PS C:>Add-DhcpServerv6ExclusionRange -ComputerName dhcpsrv.TOSSolution.com -Prefix 2406:7400:73:932f:: -StartRange 2406:7400:73:932f::1 -EndRange 2406:7400:73:932f::1
This example excludes the IPv6 address 2406:7400:73:932f::1 from the DHCPv6 scope 2406:7400:73:932f:: on the DHCP server service running on the computer named dhcpsrv.TOSSolution.com.
You can check the Version, CommandType and Source of this cmdlet by giving below command.
Get-Command Add-DhcpServerv6ExclusionRange
You can also read about
- Get-DhcpServerv6ExclusionRange
- Remove-DhcpServerv6ExclusionRange
To know more PowerShell cmdlets(Commands) on DHCPServer click here