Add-DhcpServerv4Filter is accessible with the help of DHCPServer module. To configure DHCPServer, go through this link.
Synopsis
Adds a MAC address filter to the Dynamic Host Configuration Protocol (DHCP) server service.
Description
The Add-DhcpServerv4Filter cmdlet adds the specified MAC address filter to the Dynamic Host Configuration Protocol (DHCP) server service. The MAC address can be added to the allow list or the deny list.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the DHCP server service.
| Type: | String |
| Aliases: | Cn |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
Specifies the description string for the MAC address filter being added.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-Force
Specifies that, if one or more of the MAC addresses are already present in the allow or deny list, the matching MAC addresses are deleted and the new entries created.
This parameter is useful in the case where the MAC address specified is already present in one list, such as the allow list, and the same MAC address now has to be added to the other list, such as the deny list.
If this parameter is not specified, the cmdlet fails if the specified MAC address is already present in any of the lists.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-List
Specifies the list to which one or more MAC addresses are to be added. The acceptable values for this parameter are: Allow or Deny.
| Type: | String |
| Accepted values: | Allow, Deny |
| Position: | 1 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-MacAddress
Specifies one or more MAC addresses which are to be added to the MAC address filter list.
| Type: | String[] |
| Aliases: | ClientId |
| Position: | 2 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Syntax
Add-DhcpServerv4Filter [-ComputerName <String>] [-Description <String>] [-MacAddress] <String[]> [-List] <String> [-Force] [-PassThru] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf] [-Confirm] [<CommonParameters>]
————————-EXAMPLE 1————————-
PS C:> Add-DhcpServerv4Filter -List Allow -MacAddress 00-0C-29-00-E0-6B -Description “Ravi’s Laptop”
This example adds the specified client identified by the MAC address to the allowed list of MAC address filters.
————————-EXAMPLE 2————————-
PS C:>Add-DhcpServerv4Filter -List Allow -MacAddress 00-0C-29-00-E0-6B, 00-0C-29-00-E0-6C
This example adds the specified clients identified by their MAC address to the allowed list of MAC address filters.
————————-EXAMPLE 3————————-
PS C:>Import-Csv –Path MacAddressFilters.csv | Add-DhcpServerv4Filter -ComputerName dhcpsrv.TOSSolution.com -List Allow
This example adds all of the MAC address filters in the file named MacAddressFilters.csv to the allow MAC address list of the DHCP server service running on the computer named dhcpsrv.TOSSolution.com. The Import-Csv cmdlet returns the objects with Mac address filter fields that are piped to this cmdlet, which in turn adds the MAC address filters to the server. The file named MacAddressFilters.csv should be in the following comma-separated values (CSV) format:
MacAddress,Description
00-0C-29-00-E0-6B,machine1
00-0C-29-00-E0-6C,machine2
You can check the Version, CommandType and Source of this cmdlet by giving below command.
Get-Command Add-DhcpServerv4Filter
You can also read about
- Import-Csv
- Get-DhcpServerv4Filter
- Get-DhcpServerv4FilterList
- Get-DhcpServerV4Lease
- Remove-DhcpServerv4Filter
- Set-DhcpServerv4FilterList
To know more PowerShell cmdlets(Commands) on DHCPServer click here